SoftPro Grip Splint Hand and Wrist Orthosis with Foam Cylinders

Wrist support and gradual finger and thumb positioning in one splint

The SoftPro Grip Splint holds the wrist in the position your therapist chooses, while a palmar roll sits in the palm of a fisted hand. Two foam rolls come in the box, the second slightly larger than the first, so the fingers can be eased open step by step. The bend-to-fit frame shapes by hand without heat or tools, and soft Kool-Wick covers keep it cooler and drier.

Built for a hand that stays closed

SoftPro designed the Grip Splint for moderate to severe wrist, hand and finger stiffness or flexion contractures, and for radial or ulnar deviation of the hand. The palmar bar fits comfortably into the palm of a fisted hand. As range of motion improves, the therapist swaps to the larger roll and re-shapes the frame to hold the new position.

Cooler, drier, easy to keep clean

The washable Kool-Wick covers wick moisture away from the skin, and the fabric is treated with Bacti-Ban. An extra liner comes in the box, so you can wash one while the other is worn.

What's in the SoftPro Grip Splint

• Bend-to-fit splint: shapes by hand, no heat or tools.
• Two palmar rolls (foam cylinders): 1 1/2in (3.8cm) and 2in (5.1cm).
• Colour-coded straps for easier application.
• Extra liner: Kool-Wick, washable.

Features

• Palmar bar fits into the palm of a fisted hand.
• Two step-up palmar rolls so the grip position can be increased over time.
• Bend to fit without heat or tools, for a custom fit at the wrist.
• Kool-Wick covers wick moisture away for a cooler, drier splint.
• Bacti-Ban treated fabric.
• Latex free.

Watch the SoftPro Grip Splint in use

The maker's own video shows the splint and how it fits on the hand.

Is the SoftPro Grip Splint right for you?

• Usually suits: moderate to severe wrist, hand and finger stiffness or flexion contractures, radial or ulnar deviation of the hand, or joint positioning in rheumatoid arthritis, where a therapist wants the fingers eased open over time.
• Check with your therapist first: on the wrist position, which roll to start with and wearing time.
• Included: two palmar rolls and an extra liner.

This splint is best fitted and monitored by a trained therapist. We recommend speaking with your healthcare provider or treating clinician about selection, fitting and wearing time.

Choosing the right size and side

SoftPro sizes this splint by the width across the MP joints (the big knuckles). Measure the hand the splint is for, opened out as far as it comfortably goes, or ask your therapist to measure.

1. Measure the knuckle width (A). Straight across the back of the hand at the big knuckles, from the index finger knuckle to the little finger knuckle.
2. Read the chart. Pick the size whose MP joint width covers your measurement. SoftPro also lists a length for each size; email us if you'd like us to check it against the hand.
3. Between sizes? Email us the measurement and we'll confirm the fit.
4. Choose the side. Order Left for the left hand and Right for the right hand.

We stock Paediatric Child, Small, Medium and Large, each in Left or Right. SoftPro also makes a Youth size (5.1 to 6.4cm MP width), which we don't stock; email us if you need it.

SoftPro Grip Splint specifications

Not sure which size or side? Email us

Email support@mobilityshopdirect.com.au with the answers below. Our team will check them and come back to you with the right splint, or a better match if this one isn't it.

1. Which hand is the splint for, left or right?
2. What is the knuckle (MP joint) width, in cm?
3. Is it for an adult or a child, and roughly what age?
4. Can the fingers and thumb open out flat, partly, or not at all?
5. Has a therapist recommended a grip splint, and is it for day or night wear?
6. Is there any broken skin, swelling or pressure area on the hand?